If you are thinking of opening a new carpentry shop and don’t know which tools you have to buy. Then you are landed in the right place. In this post, we will tell you the 38 must-have woodworking tools list for beginners in 2024. These tools help you to do your woodworking very easily.
Woodworking Tools List For Beginners
Name
Image
Usage
1. Claw Hammer
Used to drive nails inside and outside wood.
2. Tape Measure
Measures dimensions of the wood parts.
3. Chisel
Used for cutting or carving hard material with Hand.
4. Utility Knife
It is used to cut thin materials.
5. Moisture Meter
It is used to detect moisture content in the wood.
6. Leveler
It is used to mark the center point on wood for the drill.
7. Screwdriver Set
Used to open or close screws in Wood Parts.
8. Nail Set
It is used to mark 90-degree angles, straight lines and check straight edges
9. Layout Square
When have to shave the edge of door or window then we use hand plane. The main function of hand plane is to trim the door, window or base board to make it fit.
10. Sliding Bevel
It is used to guide the tools and fix wood pieces at specified position for making wood items
11. Hand Plane
It is used by carpenters to mark or check angles
12. Caliper
Measures inside and outside dimensions of objects. It also measures the depth of holes.
13. Clamps
It is used to hold wood particles firmly with the table.
14. Jigs
It is used to cut wood and logs.
15. Hand Saw
It detects the metals inside the wood like nails, screws, etc.
16. Feather Board
It applies pressure on the workpiece during cutting and prevents it from kicking back.
17. Metal Detector
It detects the metals inside the wood like nails, screws etc.
Its main function to support heavy tools and equipment for Working.
2. Tool Storage System
It is used to Store Tools systematically.
3. Saw Horse
It is used to support the wood board or plank during sawing.
List of Power Tools for Woodworking
Name
Image
Usage
1. Shop-Vac
It is used to grind, polish, or cut materials.
2. Bench Grinder
They are used to make smooth surfaces of wood, metal, and plastic. Also used to remove rust or paint.
3. Circular Saw
It is used to cut different materials like metal, wood plastic and masonry.
4. Power Drill
Used to make holes in different materials like wood, metal and plastic.
5. Sabre Saw
It is a portable jigsaw that can make angle cuts, crosscut and rip wood pieces.
6. Palm Sander
It is used to make rough surfaces of wood, metal and plastic smooth.
7. Random Orbital Sander
It holds the workpiece at a desired angle during a cut on band saws, table saws etc.
8. Table Saw
It is used to cut across (rips up) long wooden logs or plywood.
9. Rip Fence
It is used to cut in a straight line.
10. Miter Gauge
It holds the workpiece at a desired angle during cut on band saws, table saws etc.
11. Compound Miter Saw
It is used to cut wood materials at angles in two planes
12. Router
It is used to create patterns in workpieces of wood.
13. Band Saw
cuts curves and intricate shapes on wood.
14. Radial Arm Saw
It is used to make plane surface of wood from a rough one
15. Drill Press
It creates holes in the woods.
17. Surface Planer
It is used to make a plane surface of wood from a rough one
18. Jointer
It joins two pieces of wood where they come in contact with each other.
Conclusion
In this post, we have discussed all the essential woodworking tools list for beginners in 2024. I hope you have enjoyed the information and If you find this piece of information valuable and useful then don’t forget to like and share it.
