Headlights constitute an integral part of your vehicle. They let you see through the roads so that you can drive safely and avoid accidents. As headlights are prone to wear and tear, fixing and repairing them is a must. Listed below are some easy tips using which you can evaluate, fix, and repair all the problems with your headlights:
Step 1: Determine the Problem:
You will be able to fix your headlights only after determining the core problem. Check what is wrong with the headlights. Are they dim? Are they not working at all? Do the headlights of your vehicle have water inside? Is there any problem with the lens? Do you need a headlight lens replacement or will fixing it solve your problem?
Find the answers to these questions. Once you have figured out the main problem with your headlights, it becomes easier for you to solve the same. The most common problems with the headlights are either a burned-out bulb or an electrical issue.
Step 2: Problem with the Bulb:
In case you find that the headlight is not working because of a problematic bulb, screw it from the back of the headlight lens. Check the overall status of the bulb. If it is looking burned-out, black, melted, and discolored, it’s time to replace the bulb with a newer one.
You can buy a headlight bulb from an automotive store near you. A headlight bulb doesn’t cost you a fortune. Insert the new bulb into the headlight and ensure not to touch its glass part, or the grease will emit on your fingers. Once the installation is over, try the lights.
Step 3: Check the Electrical Problem:
Once you have tried installing the new bulb, you can check to light the same. If the bulb doesn’t light, there might be an electrical problem in your headlight area. In this situation, it is advisable not to take the task of repairing in your hands and contact a local mechanic instead.
The local mechanic will not only inspect the problem but will find a quick solution and will also suggest all the preventive measures to avoid such damages.
Step 4: Check the Water in the Lens:
Many times, water slips into the headlight area of your vehicle. It intrudes with the smooth functioning of the bulb. As a result, the headlights stop working. The common causes of slipping of water in the lens include a crack, leak, or hole in the lens.
If the lens of your car is made of plastic, remove it carefully and then drill a tiny hole in the bottom of the lens. Be careful while performing this step. Now, let the water run out of the hole. Patch the hole with silicone. You can also use a more durable sealant such as urethane to seal the small hole or crack caused in the headlights area. If the hole is large, opt for a headlight lens replacement.
Step 5: Fix the Cloudy Headlight Lenses:
Another common problem with the headlights is yellow and cloudy headlight lenses. This problem leads to a diminished output and also results in poor visibility, especially when it is pitch dark. Driving your car with cloudy and yellow headlights may lead to severe accidents.
This problem needs immediate repair at a professional service center. You can call a local mechanic to inspect the problem and fix the same. Besides this, always keep a headlight cleaning kit available and maintain the headlight timely.
Takeaway:
Driving your car with broken or damaged headlights is full of dangers. Always remember to drive your vehicle safely. Get your car serviced now and then to avoid unwanted damages.
